Allied Telesis AT-WCC201G - Manual (Page 30)

Chapter 2: Using the Adapter’s Configuration Utility
30
Installing the Configuration Utility
To install the configuration program on your computer from the Software
and Documentation CD, perform the following procedure:
1. Power ON the computer.
2. Insert the Software and Documentation CD into the CD drive of the
computer.
Your system should automatically launch the CD and display the main
window, shown in Figure 12. If this window does not appear, double-
click on the My Computer icon, then double-click on the Allied Telesyn
Installation CD icon.
Figure 12. Software and Documentation CD Main Window
3. Click Configuration Utility.
Note
The security prompts in Figure 13, Figure 14, and Figure 15 are from
Microsoft Internet Explorer version 6.0. You may not see these
prompts or you may see different prompts if you are using a different
version of Microsoft Internet Explorer or a different web browser.