Allied Telesis AT-iMG606BD - Manual (Page 36)

Chapter 2: Installation
36
8. Wrap the cable in a figure eight around the spindles in
the center and finally around the U-shaped spindle, as
shown in Figure 12.
Figure 12. Wrapping the Cable around the Spindles
You should have between 2 to 3 inches of cable at the
end.
9. Thread the end of the cable through the triangular slot
adjacent to the post in the upper left corner of the
cover, as shown in Figure 13.
Figure 13. Threading the Cable through the Cover
U-shaped
Spindle
CLASS 1
LASER PRODUCT