Allied Telesis AT-iMG606BD - Manual (Page 32)

Chapter 2: Installation
32
Unpacking the AT-iMG606BD Multiservice Gateway
To unpack the gateway perform the following procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. You
must use the original shipping material if you need to
return the unit to Allied Telesyn.
2. Verify that the following items are included in your
gateway package. If an item is missing or damaged,
contact your Allied Telesyn sales representative for
assistance.
ˆ One AT-iMG606BD Multiservice Gateway
ˆ One AT-RG002 base unit consisting of three
pieces and four screws
ˆ This installation guide
ˆ One 12V, 1.5A AC/DC power adapter (Only
included if ordered with the gateway at time of
purchase.)
ˆ Warranty card