Allied Telesis AT-EN646MOD Enclosure - Manual (Page 9)

9
Chapter 3
Enclosure Installation
Tools Required
Have the following tools on hand before you install the enclosure:
ˆ
3/8” drill
ˆ
Drill bit for the size of wall anchor or fastener you intend to use for the enclosure
ˆ
Flat head and #2 Phillips screwdrivers
ˆ
SM fusion splicer and required fiber handling tools
ˆ 3/8 in. nut driver
ˆ 5/32 in. hex-pin security screwdriver
ˆ Pliers
Additional Supplies
You may also need the following supplies:
ˆ Mounting screws or bolts suitable for the mounting location and material.
ˆ Silicone sealant
ˆ Fiber cleaning materials
ˆ One 1m SC/UPC SM pigtail
ˆ One SM fusion splice protector
ˆ One earth ground rod, if not already present
ˆ 14AWG solid copper ground wire