beautypg.com

Install the grounding plate – Allied Telesis AT-EN646MOD Enclosure User Manual

Page 12

background image

AT-EN646MOD Installation Guide

12

Chapter 3: Enclosure Installation

Install the Grounding Plate

1. Remove the grounding plate and the self-tapping screws from the accessory kit.

2. Review the grounding plate layout, as shown in Figure 5.

Figure 5. Grounding Plate

3. Align the mounting holes in the grounding plate with the holes in the back of the enclosure, as shown in

Figure 6

4. Use the two 14mm self-tapping screw to secure the grounding plate to the enclosure through the

mounting hole in the grounding plate.

Note

Do not overtighten the self-tapping screws.