Allied Telesis AT-FS750/48 - Manual (Page 35)

AT-FS750/48 Fast Ethernet Smart Switch Installation Guide
35
Installing the Switch on a Desktop
You can place the switch on a desktop or install them in a 19-inch rack. To
install the switch in a rack, refer to “Installing the Switch in a Rack” on
page 36.
To place the switch on a desktop, perform the following procedure:
1. Remove all equipment from the package and store the packaging
material in a safe place.
2. Turn the switch over and attach the four rubber feet to the bottom of
the switch as shown in Figure 8.
Figure 8. Attaching the Rubber Feet
3. Turn the switch over again and place it on a flat, secure surface (such
as a desk or table) leaving ample space around the unit for ventilation.
1005
LINK
1000M
ACT
10M 100M
PORT A CTIVITY
100M 10M