Allied Telesis AT-CV1000 - Manual (Page 32)

Chapter 3: Installation
32
Installing a Converteon™ Line Card
To install a Converteon™ line card, perform the following procedure:
1. Remove the Converteon™ line card from its shipping package and
store the package in a safe place.
Note
You must use the original package if you need to return the unit to
Allied Telesis.
2. Loosen the captive screw to remove the AT-CV5PNL1 blank slot cover
from the AT-CV1000.
Keep the blank slot cover in a safe area in case you remove the line
card. The blank slot cover is used to keep dust from getting into the
chassis and maintains proper airflow, cooling, and ventilation through-
out the chassis.
3. Set the line card’s DIP switches.
For more information on the DIP switch settings, refer to the
Converteon™ Media Converter Line Cards Reference Guide.
Caution Be sure to observe all standard electrostatic discharge
(ESD) precautions, such as wearing an antistatic wrist strap, to
avoid damaging the device. A line card can be damaged by
static electricity.