Allied Telesis AT-CV1000 - Manual (Page 24)

Chapter 3: Installation
24
Unpacking the Chassis
To unpack the chassis, perform the following procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Make sure that the following components are included in the package.
If any item is missing or damaged, contact your Allied Telesis sales
representative for assistance.
ˆ One AT-CV1000 chassis with an AT-CV5PNL1 blank slot cover
installed
ˆ Four self-adhesive rubber feet
ˆ Two wall mounting brackets
ˆ Two plastic anchors (for wall mounting)
ˆ Two flat-head self-tapping screws (for wall mounting)
ˆ One power adapter
ˆ One power cord
ˆ Documentation CD
ˆ Warranty card