Network topologies, Standalone topology, Figure 5. standalone network topology – Allied Telesis AT-CV1000 User Manual
Page 19: Network 1 network 2, At-8524m, At-fs709fc
AT-CV1000 One-Slot Chassis Installation Guide
19
Network Topologies
This section describes two network topologies you can create with the
Converteon™ Fast and Gigabit media converter line cards installe in an
AT-CV1000 chassis.
Standalone
Topology
Figure 5 illustrates a standalone topology using one AT-CV1000 chassis
with an AT-CM202 line card installed to interconnect two small networks.
Network 1 has an AT-FS709FC switch connected to the 100Base-FX
port on the AT-CM202 line card in the AT-CV1000 media converter.
Network 2 has an AT-8524M switch connected to the 10/100Base-TX
port on the AT-CM202 line card in the AT-CV1000 media converter.
Figure 5. Standalone Network Topology
AT-8524M
AT-8524M
AT-8524M
Twisted Pair
Fiber Optic
AT-CV1000 (w/ AT-CM202)
AT-8524M
10BASE-T / 100BASE-TX 8 PORT FAST ETHERNET SWITCH WITH 100FX UPLINK
1X
8MDI
OR
2X
3X
4X
5X
6X
7X
9
8MDI-X
POWER
LINK/ACT
100M
FDX
1
2
3
4
5
6
7
8
9
FS709FC
AT-FS709FC
NETWORK 1
NETWORK 2
A
T
-CM202
RDY
T
X
F
X
M
M
T
X
R
X
AT
LK
FD
LK
AT
AT-CV1000
ML/ SML
10/ 100
OA
M