beautypg.com

Powering on an ac-powered chassis – Allied Telesis AT-MCR12 User Manual

Page 39

background image

AT-MCR12 Media Conversion Rack-Mount Chassis Installation Guide

39

Powering on an AC-Powered Chassis

To power on the chassis, perform the following procedure:

1. Connect the power cord to the power supply.

2. Plug the other end of the power cord into a wall outlet.

3. Verify that the power on LED is illuminated and the power supply

cooling fan is operating normally.

Warning: Power cord is used as a disconnection device. To de-
energize equipment, disconnect the power cord. E3

Pluggable Equipment. The socket outlet shall be installed near
the equipment and shall be easily accessible. E5