Allied Telesis AT-MCR12 - Manual (Page 26)

Chapter 2: Installation
26
Preparing the Site
Be sure to observe the following guidelines when planning the installation
of your chassis.
ˆ Make sure power for the chassis is accessible and cables can be
easily connected.
ˆ Cables must be away from sources of electrical noise such as radios,
transmitters, broadband amplifiers, power lines, fluorescent or halogen
light fixtures.
ˆ Air flow around the chassis and through its vents on the rear and side
panels should not be restricted.
ˆ If you are using the chassis on a desktop, make sure it is placed on a
level, secure surface.
ˆ Do not place objects on top of the chassis.
ˆ Do not expose the chassis to moisture or water.
ˆ Make sure the chassis is in a dust-free environment.
ˆ Use dedicated power circuits or power conditioners to supply reliable
electrical power to the network devices.