Appendix a - enabling anonymous ftp, 1 overview, 2 windows – Allied Telesis Telesyn AlliedView NMS System 9.0 User Manual
Page 53: 10 appendix - enabling anonymous ftp -1, 1 overview -1, 2 windows -1
10-1
AlliedView NMS Installation Guide (Appendix A - Enabling Anonymous FTP)
10. Appendix A - Enabling Anonymous FTP
10.1 Overview
Use the following steps to enable anonymous FTP on the Backend Server. Refer to the AlliedView NMS Admin-
istration Guide for how this works.
10.2 Windows
1.
Control Panel -> Add/Remove Programs -> Add/Remove Windows Components
2.
Select (without checking) Internet Information Services (IIS)
Note:
For Windows 2003, Internet Information Services is under Application Server -> Details.
3.
Click on Details
4.
Check File Transfer Protocol Server, which will check its dependencies
5.
Click Okay
6.
Load the CD if prompted and enter the path
D:\ENGLISH\WIN2000\ADV_SERV\I386
The default configuration will consist of:
•
Anonymous access only, with passwords under Windows control
•
Read access only
•
Root is
C:\inetpub\ftproot
•
Logging is enabled
Write access has to be enabled. Other defaults may be modified. If the ftp root directory is modified, then it has
to be added to the AlliedView NMS config file conf\AT_server.properties.
1.
Control Panel -> Administrative Tools -> Internet Services Manager
2.
Select the host
3.
Select the “Default FTP Site”
4.
Right click and select Properties
5.
Select the “Home Directory” tab and enable Write access.