Installation steps - overview, 9 installation steps - overview -1 – Allied Telesis Telesyn AlliedView NMS System 9.0 User Manual
Page 49

9-1
AlliedView NMS Installation Guide (Installation Steps - Overview)
9. Installation Steps - Overview
The previous sections of this Guide have shown how the various components of the AlliedView NMS are
installed on the server and clients, as well as provisioning extensions for HP OpenView. The NMS Administra-
tion Guide explains how the NMS programs and configuration discover the network devices so that they are dis-
played and managed by the AlliedView NMS interface.
The following lists the steps to go through the installation of the NMS and the network devices to ensure that all
devices are able to be discovered, the AlliedView NMS and the devices are physically connected, and the NMS is
polling and receiving the appropriate data from the devices.
9.1 NMS and iMAP/AT Device Software Version
Compatibility
For every version of the AlliedView NMS, there is a list of devices that the version of AlliedView NMS will sup-
port, as well as the software version of these devices.
Caution: Refer to the AlliedView NMS Administration Guide for the list of devices and their
software versions supported by the latest version of the AlliedView NMS. If there is
any question about compatibility, consult with your authorized Allied Telesis
representative.