Installing an upgrade pack, 1 overview, 2 upgrading the single server nms back-end – Allied Telesis Telesyn AlliedView NMS System 9.0 User Manual

Page 27: 4 installing an upgrade pack -1, 1 overview -1, 2 upgrading the single server nms back-end -1

4-1

AlliedView NMS Installation Guide (Installing an Upgrade Pack)

4. Installing an Upgrade Pack

4.1 Overview

The upgrade pack is used to bring your AlliedView NMS to the next major software release. The process is iden-
tical for both Windows and Solaris. In 9.0 the same upgrade pack is used for Solaris and Windows.

Note:

Prior to this procedure, perform a server backup as documented in

3.4

4.2 Upgrading the Single Server NMS Back-End

Shut down the NMS Server. Refer to Chapter

Caution: You must shut down the AlliedView NMS server; otherwise, the AlliedView NMS server

cannot successfully install the upgrade pack.

In your /bin directory and locate file UpdateManager. Execute this file. This will bring up
the AlliedView NMS Update Manager window shown in the following figure.

Note: Use

the

UpdateManager.bat file for Windows, or the UpdateManager.sh file for Solaris.