Allied Telesis AT-МС602 - Manual (Page 32)

AT-MC601, AT-MC602 Installation and User’s Guide
32
Cabling the
Provider Unit
To cable the Provider unit, perform the following steps:
1. First, connect the Ethernet cable from the Ethernet port to the Service
Provider box in your wiring closet, as shown in Figure 20.
Figure 20 Ethernet to Internet Service Provider
2. Then, connect a telephone line cable from the PSTN port to the outside
telco box, as shown in Figure 21.
Figure 21 PSTN to Telco PBX Line
MCR12
LINE
10 Base
T /
100Base
TX LINK AC T PWR
ERR LINK
MGMT
AT -MC603
VDSL EXTENDED ETHERNET
PSTN
Internet
Service
Provider
Telco
PBX
Line
MCR12
LINE
10 Base
T /
100Base
TX
LINK AC T PWR
ERR LINK
MGMT
AT -MC603
VDSL EXTENDED ETHERNET
PSTN