Allied Telesis AT-2973T (NetExtreme II) - Manual (Page 75)

AT-2973SX and AT-2973T NetExtreme II Family Adapters Installation and User’s Guide
75
Note
To use the TCP/IP Offload Engine (TOE), you must have Windows
Server 2003 with Service Pack 2 (SP2) and a license key
preprogrammed in the hardware. If supported, for iSCSI and RDMA,
you only need a license key.
Using the
Installer
The Installer is a graphical interactive installation mode. To install the AT-
2973SX and AT-2973T drivers on a Windows Operating System, do the
following:
1. When the Found New Hardware Wizard appears, click Cancel.
See Figure 11.
Figure 11. Found New Hardware Wizard Page
2. From the driver directory, select the setup.exe file and Run.
The Broadcom NetXtreme II Driver Installer - InstallShield Wizard
Page is displayed. See Figure 12 on page 76.