Allied Telesis AT-2973T (NetExtreme II) - Manual (Page 46)

Chapter 4: Installing the NDIS2 Driver Software
46
DriverName=PROTMAN$
PRIORITY=MS$NDISHLP
[MS$NDISHLP]
DriverName=ndishlp$
BINDINGS=MS$NE2CLONE
[MS$NETBEUI]
DriverName=netbeui$
SESSIONS=10
NCBS=12
BINDINGS=MS$NE2CLONE
LANABASE=0
2. Edit A:\Net\System.ini.
3. Change netcard= to netcard=BXND20X.dos.
4. Check for references to C:\NET and change C:\NET to A:\NET if
necessary.
Example system.ini file
The following is an example of a system.ini file:
[network]
sizworkbuf=1498
filesharing=no
printsharing=no
autologon=yes
computername=MYPC
lanroot=A:\NET
username=USER1
workgroup=WORKGROUP
reconnect=yes
dospophotkey=N
lmlogon=0
logondomain=
preferredredir=basic
autostart=basic
maxconnections=8
[network drivers]
netcard=BXND20X.dos
transport=ndishlp.sys,*netbeui
devdir=A:\NET
LoadRMDrivers=yes
5. Copy BXND20X.dos to A:\Net.