Allied Telesis AT-2973T (NetExtreme II) - Manual (Page 27)

AT-2973SX and AT-2973T NetExtreme II Family Adapters Installation and User’s Guide
27
Replacing the Bracket
Both the AT-2973SX and AT-2973T adapters are shipped with the low-
profile bracket attached to the adapter. Depending on your PC, you may
need to replace the bracket attached to your adapter.
The following procedure describes how to remove the low-profile bracket
from the adapter and replace it with the standard bracket. You can also
use this procedure to remove the standard bracket and replace it with the
low-profile bracket.
To replace the low-profile bracket with the standard bracket, perform the
following procedure:
1. Remove the screws that attach the bracket to the adapter. See
Figure 5.
Figure 5. Removing the Low-Profile Bracket
1697
ACT
LNK
AT
I