Allied Telesis AT-2973T (NetExtreme II) - Manual (Page 119)

AT-2973SX and AT-2973T NetExtreme II Family Adapters Installation and User’s Guide
119
uxdiag -fnvm
Programs the raw image into NVM.
uxdiag -fump
Specifies the bin file to update UMP
firmware.
uxdiag -help Displays the Broadcom NetXtreme II
User Diagnostics (uxdiag) command
options.
uxdiag -I Specifies the number of iterations to
run on the selected tests.
uxdiag -idmatch Enables matching of VID, DID, SVID,
and SSID from the image file with
device IDs. Used only with -fnvm
.
uxdiag -log Logs the test results to a specified log
file.
uxdiag -mba <1/0> Enables/disables Multiple Boot Agent
(MBA) protocol where:
1 = Enable
0 = Disable
uxdiag -mbap Sets the MBA boot protocol where:
0 = PXE
1 = RPL
2 = BOOTP
3 = iSCSI_Boot
uxdiag -mbas Sets the MBA/PXE speed where:
0 = Auto
1 = 10H
2 = 10F
3 = 100H
4 = 100F
6 = 1000F
uxdiag -mbav <1|0> Enables/disables MBA VLAN.
1 = Enable
0 = Disable
uxdiag -mbavval Sets MBA VLAN (<65536).
uxdiag -mfw <1/0> Enables/disables management
firmware where:
1 = Enable
0 = Disable
Table 7. uxdiag Command Options (Continued)
Command Options Description