Allied Telesis AT-FS724L - Manual (Page 28)

Chapter 2: Installation
28
Unpacking the Switch
To unpack an AT-FS716L or an AT-FS724L switch, perform the following
procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesyn.
2. Place the switch on a level, secure surface.
3. Ensure the following hardware components are included in your switch
package. If any item is missing or damaged, contact your Allied
Telesis sales representative for assistance.
ˆ One AT-716L or AT-FS724L Fast Ethernet Switch
ˆ Four self-adhesive rubber feet
ˆ Wall mount kit
ˆ 19” rack mounting kit
ˆ AC power cord