Allied Telesis AT-GS2002/SP - Manual (Page 39)

AT-GS2002/SP Gigabit Ethernet to Fiber SFP Media Converter Installation Guide
39
Rack Mount Installation
For a rack mount installation of the AT-GS2002/SP into an equipment
rack, you must first install the AT-GS2002/SP into an AT-MCR12 Rack
Mount Chassis, AT-TRAY4 Rack Mount Tray or AT-TRAY1 Rack/Wall
Mount Bracket.
Note
The AT-MCR12, AT-TRAY4 and AT-TRAY products are provided
separately and can be procured by contacting an Allied Telesis sales
representative. For a detailed description of the installation
procedures for these products, refer to the product documentation
on our www.alliedtelesis.com web site.
After the AT-GS2002/SP Media Converter is installed in the equipment
rack, go to “Cable Installation” on page 40