Allied Telesis AT-GS2002/SP - Manual (Page 37)

AT-GS2002/SP Gigabit Ethernet to Fiber SFP Media Converter Installation Guide
37
Desktop Installation
You may install the AT-GS2002/SP Media Converter on a desktop by
performing the following procedure:
1. Remove all equipment from the package and store the packaging
material in a safe place.
2. Turn the media converter over and place it on a table.
3. Attach the four rubber feet to the bottom of the media converter as
shown in Figure 7.
Figure 7. Attaching the Rubber Feet
4. Turn the media converter over and place it on a flat, secure surface
(such as a desk or table) leaving ample space around the unit for
ventilation.
5. Go to “SFP Transceiver Installation” on page 35 or “Cable Installation”
on page 40.