Allied Telesis AT-GS2002/SP - Manual (Page 17)

AT-GS2002/SP Gigabit Ethernet to Fiber SFP Media Converter Installation Guide
17
SFP Port Here are the features of the SFP port:
 1 Port
 100BaseX and 1000BaseFX compliant
 IEEE 802.3x flow control in 100Base-TX full-duplex operation
 IEEE 802.3x back pressure in 100Base-TX half-duplex operation
 IEEE803.3z 1000Base-T flow control
Note
SFP transceivers must be purchased separately. For a list of
supported transceivers, contact your Allied Telesis distributor or
reseller.
LEDs
The AT-GS2002/SP Media Converter has the following LEDs:
 Speed and link/activity LEDs for the both the twisted-pair port and
SFP slot
 Duplex LEDs
 Mode LEDs
 Power LED
Installation
Options
Here are the installation options for the AT-GS2002/SP Media Converter:
 Desk or tabletop installation
 Wall mount installation
Note
Wall mount installation requires that the AT-GS2002/SP Media
Converter be installed in an AT-TRAY1 Rack/Wall Mount Bracket.
 Rack mount installation
Note
Rack mount installation requires that the AT-GS2002/SP Media
Converter be installed in an AT-MCR12 Rack Mount Chassis, an
AT-TRAY4 Rack Mount Tray or an AT-TRAY1 Rack/Wall Mount
Bracket.
MAC Address
Table
Here are the basic features of the AT-GS2002/SP Media Converter MAC
address table:
 Storage capacity of 4,000 MAC address entries
 Automatic learning and aging