Allied Telesis AT-2701 Series Adapters - Manual (Page 68)

Modifying Advanced Properties
68
Speed/Duplex (100Mb Fiber)
The Speed/Duplex (100MB Fiber) property sets the link speed and duplex
mode for the optic fiber adapter.
To change the Speed/Duplex (100MB Fiber) property, do the following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 60.
2. Select Speed/Duplex (100Mb Fiber) in the Property box.
The Speed/Duplex (100Mb Fiber) page is displayed as shown in
Figure 36.
Figure 36. Speed/Duplex (100Mb Fiber) Page
3. Select one of the following options:
 (1) 100Mb/Half Duplex
 (2) 100Mb/Full Duplex — This is the default setting.
4. Click OK.