Allied Telesis AT-2701 Series Adapters - Manual (Page 62)

Modifying Advanced Properties
62
Early Tx Threshold
The Early Tx Threshold property allows you to control the FIFO buffer
threshold. The system starts transmitting the data when the FIFO buffer
reaches the amount specified as the Early Tx Threshold.
To change the value of Early Tx Threshold, do the following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 60.
2. Select Early Tx Threshold in the Property box.
The Early Tx Threshold page is displayed as shown in Figure 32.
Figure 32. Early Tx Threshold Page
3. Select one of the following options:
 (1) 32 bytes
 (2) 64 bytes
 (3) 128 bytes — This is the default setting.
 (4) 256 bytes
 (5) 512 bytes
 (6) 1500 bytes
4. Click OK.