Allied Telesis AT-2701 Series Adapters - Manual (Page 48)

Installing the Driver Software for Windows
48
The shortcut menu appears as shown in Figure 29.
Figure 29. Network Adapters on Windows XP
3. Select Update Driver.
The Hardware Update Wizard window pops up as shown in Figure 24
on page 43.
4. Select No, not this time.
5. Click Next.
The Hardware Update Wizard prompts you to select one of two
options as shown in Figure 25 on page 44.
6. Select Install from a list or specific location (Advanced).
7. Click Next.
The Hardware Update Wizard prompts you to specify the location of
your driver software as shown in Figure 26 on page 45.
8. Specify the location of the driver software that you downloaded from
Allied Telesis website.
9. Click Next.
The confirmation message is displayed as shown in Figure 27 on page
45.
10. Click Finish.