Samsung SCH-A570ZSVXAR - Manual (Page 40)

40
Sect
ion 3
Ending Calls Before Restarting the VoiceSignal Software
When you use VoiceSignal to make a call, you must end
the call before you can use the VoiceSignal application
again.
Starting VoiceSignal
To start the VoiceSignal application, press and hold the
key for about a second, and then release the key.
You can also set the phone to start VoiceSignal when you
flip the phone open.
To change the way you launch VoiceSignal:
1. In standby mode, press and hold the key to launch
VoiceSignal.
“Say a Command” appears in the display and is
pronounced through the speaker.
2. Press the left soft key to select Settings, and then press
for Voice Launch to select how you want to launch
VoiceSignal.
When you start VoiceSignal, it displays its main menu of
voice commands and prompts you to "Say a command."
Note: Speak clearly and say the command that you want to use. If, after a
few seconds, the device has not recognized a command, it prompts you to
repeat the command. If, after a few more seconds, it still has not
recognized a command, it tells you "Sorry, no match found," and cancels
voice recognition.
Template.book Page 40 Friday, April 15, 2005 12:36 PM