Samsung SC-HMX10C-XAA - Manual (Page 79)

71_ English
Component Out
You can select the type of component video signal that is compatible with the connected TV.
Settings Contents
On-
screen
display
Auto
The video signals are output with the same format of the
recorded file. Please use it only for connecting to HDTV. When
the “Auto” is selected, indicator does not appear on the screen.
None
SD 480P
The recorded file is output with 480P format. Select it only
when the TV to connect is for SD quality and it supports the
progressive scan.
SD 480i
The recorded file is output with 720x480i format. Select it to
connect to an SD-quality TV that does not support progressive
scan.
Default Set
You can restore menu settings to default (initial settings at the factory) pages 49-51
Initializing the HD camcorder settings to factory defaults does not affect recorded
images.
Language
You can select a desired language to display the menu and messages.
“Language” options may be changed without prior notice.
Demo
Demonstration automatically shows you the major functions that are included with your HD
camcorder so that you may use them more easily.
Settings Contents
On-
screen
display
Off Disables the function None
On Activates demonstration mode and shows various features. None
• Demo functions works after 5 minutes pass in STBY mode of movie mode.
• You can release Demo function as follows.
- Touching any point on LCD screen / changing mode / pressing the button
( Recording start/stop, Q.MENU, Display ( )/iCHECK, EASY Q, or
LCD enhancer ( ))
• Demo function does not work when the Multi-AV or component cable (only
when “Component Out” is set to 480p or 480i) is connected to TV. Also
Demo stops and it returns to STBY mode once above cables are connected.
臺灣 _ 71
Component Out
您可選擇與所連電視機相容的元件視訊訊號的類型。
設定 內容
畫面顯
示語言
Auto
透過與所錄檔案相同的格式輸出視訊訊號。請只在連接至 HDTV
時使用它。當選擇「自動」時，螢幕上不會出現指示燈。
無
SD 480P
錄製的檔案透過 480P 格式輸出。僅當所連的電視機相容 SD 品
質及它支援前進式掃瞄時選擇它。
SD 480i
錄製的檔案透過 720x480i 格式輸出。將其選擇以連接至 SD 品
質的電視機（不支援前進式掃瞄。）
Default Set
您可將選單設定還原為預設（工廠的起始設定）  第 49-51 頁
將 HD 攝錄放影機設定初始化為工廠預設不會影響錄製的影像。
Language
您可以選擇所需的語言以顯示選單和訊息。
「 Language」選項可能會變更，而不預先通知。
Demo
示範畫面將自動顯示 HD 攝錄放影機中的主要功能，讓您可以更輕鬆地使用這些功能。
設定 內容
畫面顯
示語言
Off 停用功能 無
On 啟動示範模式並顯示各種功能。 無
• 示範功能在 5 分鐘後以影片模式的「待機」模式操作。
• 您可以按照如下方式解除示範功能。
- 觸摸 LCD 螢幕上的任意位置 / 變更模式 / 按下按鈕（ 錄製開始 / 停止，
Q.MENU，顯示 ( )/iCHECK，EASY Q，或 LCD 增強器 ( )）
• 如果將 Multi-AV 或分量視訊電線（僅當將 “Component Out” 設定為 480p
或 480i 時）連接到電視，則「演示」功能不可用。 連接上述電纜後，「演示」
也會停止並返回到 STBY 模式。