Samsung SPH-A700BSSXAR - Manual (Page 152)

Section 3B: Sprint PCS Vision 144
Net Guard
When you first connect to the Web, the Net Guard will appear to
confirm that you want to connect. This feature helps you avoid
accidental connections. You can disable the Net Guard in the future
by selecting Always Auto-Connect when the Net Guard is displayed.
To change your Net Guard settings:
1. Press for Main Menu.
2. Highlight Settings and press .
3. Press for PCS Vision.
4. Press for Net Guard.
5. Press up or down to select On or Off.
6. Press to Save.
Note: When enabled, the Net Guard appears only once per session. The Net Guard
does not appear if the phone is merely re-connecting due to a time-out.
Vision Connection Status and Indicators
Your phone's display lets you know the current status of your
Vision connection through indicators which appear at the top of the
screen. The following symbols are used:
Your Vision connection is active (data is being transferred); the
transmit/receive symbol will blink to indicate data
transmission. Incoming voice calls go directly to voicemail;
outgoing voice calls can be made, but the Vision connection
will terminate.
Your Vision connection is dormant (no data is being sent
or received). Though not currently active, when dormant the
phone can restart an active connection quickly; voice calls can
be made and received.
Your phone is not currently able to access Vision service
features.
If no indicator appears, your phone does not have a current
Vision connection. To launch a connection, see “Launching a Vision
Connection” on page 143.