Answering calls – Samsung SPH-M240ZKASPR User Manual
Page 32
20
ⅷ
Hard Pause:
Enter digits and then use this feature to
enter a hard pause within a number string (the
phone waits for your input).
Ⅲ
Once used, a popup menu asks if you would like
to send the remaining numbers. To continue
dialing, you must press
Send Tones
(left softkey).
(See “Dialing and Saving Phone Numbers With
Pauses” on page 25.)
ⅷ
2sec Pause:
Enter digits and then use this feature to
enter a 2 second delay within a number string (the
phone continues dialing after 2 seconds without any
additional keys being pressed). (See “Dialing and
Saving Phone Numbers With Pauses” on page 25.)
Answering Calls
1.
Make sure your phone is on. (If your phone is off,
incoming calls go to voicemail.)
2.
Press
to answer an incoming call.
(Depending on your settings, you may also answer
incoming calls by opening the phone or by
pressing any number key. See “Call Answer Mode”
on page 45 for more information.)
Your phone notifies you of incoming calls in the
following ways:
ⅷ
The phone rings or vibrates.
ⅷ
The indicator light flashes.
ⅷ
The backlight illuminates.
ⅷ
The screen displays an incoming call message.
If the incoming call is from a number stored in your
Contacts, the entry’s name is displayed. You may also
see the caller’s phone number, if available.
If you set Call Answer to
Talk Key
Mode” on page 45), you also see the following options.
To select an option, press the corresponding softkey.
ⅷ
Silent
(left softkey) to mute the onboard speaker and
temporarily silence the ringer.
ⅷ
Ignore
(right softkey) to send the call to your voicemail
box.
Note
To quiet the ringer, press
or press the volume
button.
Sprint M240.book Page 20 Sunday, July 26, 2009 11:11 AM