Samsung SPH-M240ZKASPR - Manual (Page 104)

92 3B. Web and Data Services
While connecting, an animation and a “Connecting”
message may be displayed.
Net Guard
When you first connect to the Web, the Net Guard will
be displayed to confirm that you want to connect. This
feature helps you avoid accidental connections. You
can disable the Net Guard in the future by selecting
Always Auto-Connect when the Net Guard is displayed.
To change your Net Guard settings:
ᮣ Press > Settings > More... > Data > Net Guard .
Ⅲ Select On to activate the Net Guard.
Ⅲ Select Off to deactivate the Net Guard.
Data Connection Status and Indicators
Your phone displays the current status of your data
connection through indicators at the top of the screen.
The following symbols are used:
Your data connection is active (data is being
transferred); the transmit/receive symbol will
blink to indicate data transmission. During data
usage, you can not receive incoming voice
calls or SMS messages; outgoing voice calls
can be made, but the data services connection
will terminate.
Your data connection is dormant (no data is
being sent or received). Though not currently
active, when dormant the phone can restart an
active connection quickly; voice calls can be
made and received.
If no indicator is displayed, your phone does not have a
current data connection. To launch a connection, see
“Launching a Web Connection” on page 91.
Tip To change the default launch page to the last page
you viewed, press
Menu (right softkey) > Mark this
page and select the Set this as my homepage , select
Save and press OK .
Note When enabled, the Net Guard appears only once as
long as you have not turned the phone off and on.
Sprint M240.book Page 92 Sunday, July 26, 2009 11:11 AM