Samsung HT-AS720ST-XAA - Manual (Page 18)

Connect the AV receiver to a Samsung TV with an HDMI cable. (See page 17)
Set the Anynet+ function on your TV. (See the TV instruction manual for more information.)
• You can operate the AV receiver by using the TV remote control.
(Available TV button : VOLUME , button.)
1
2
18
Using Anynet+(HDMI-CEC)
Set the Anynet+(HDMI-CEC) function to on your TV.
• Receiver : On : You can listen to audio through the AV Receiver.
• Receiver : Off : You can listen to audio through the TV.
Select THEATER to connector and set the option of each items below.
• View TV : If Anynet+(HDMI-CEC) set to on and you select View TV, the AV receiver will
automatically switch to SAT OPTIC2(DIGITAL IN).
• Receiver : On : You can listen to audio through the AV receiver.
• Receiver : Off : You can listen to audio through the TV.
1 Press SETUP/MENU button, and then press the ENTER button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
2 Press œ √ button to select the “ANYNET+ MODE”, and then press the ENTER button.
3 Press the …† button to set ANYNET+ to OFF.
- If you are using Anynet+, set ANYNET+ to ON and if not, set it to OFF.
If you select TV
If you select the DVD Player
To turn off Anynet+
With Anynet+
You can operate this unit, power on your TV, or watch a movie by pressing the Play button on
your Samsung TV's remote control.
Anynet+
• When selecting View TV, you must have a digital optical cable connected
from the TV to the AV receiver to listen to the TV sound through the AV
receiver.
MOVE ENTER EXIT
MOVE ENTER EXIT MOVE ENTER EXIT
To exit setup mode
• Wait for about 5 seconds or press SETUP button.
“SETUP OFF” appears on the display and Setup Mode is exited.
• When you are making Anynet+ connection, do not connect more than two AV receivers
(Anynet+ installed). Otherwise, it can cause a malfunction.
Caution
HT-AS720S-XAA-ENG 2007.8.21 6:8 PM Page 18