Samsung SCH-R860ZKAMTR - Manual (Page 62)

59
2. Address your message as you
would a Text message (see
“Creating and Sending a Text
Message” on page 55).
3. If desired, select the Subject
field. The 3X4 Keypad screen
appears in mixed-case mode.
Note: You can use any of the r860’s four
text entry screens to enter your
message text. (For more information,
refer to “Changing Text Entry
Screens” on page 49.)
4. Enter the Subject text. (For
more information, refer to
“Entering Text” on page 49.)
• To use pre-composed text, press the Add Quick Text soft key, then
select the desired Quick Text to add to your message.
5. If desired, repeat steps 3 and 4 for the Text field.
6. To add a video clip to the message, select the Video field.
You are prompted to Take a Video or to add a video clip
from the My Videos folder.
• To activate the phone’s camcorder and record a new video clip,
select Take Video. (For more information, refer to “Camera-
Camcorder” on page 73.) Once you’ve recorded a video clip,
press the Send soft key.
• To access your video gallery, press My Videos. With video clips in
the gallery, a list of thumbnail images appears in the display. Select
the desired video clip and press the Send soft key.
You are returned to the Video Msg screen which is
populated with the selected video clip in the Video field.
7. Before sending your Video message, you can set message
send options by pressing the More soft key and select
Sending Options. (For more information, refer to “Message
Sending Options” on page 60.)
8. To preview your Video message as the recipient(s) will see
it, press the Preview soft key.
• To make changes to your message, press the Back soft key.
9. To send your finished message, press the Send soft key.
Send Video Messages in Camcorder Mode
Video messages can be sent from your phone’s camcorder to
recipients with compatible phones or devices.
Tip: You can send a Video message to up to ten recipients. Enter each
recipient’s address or phone number in a separate To field of the Video
Msg screen.
1. In Standby mode, press and hold the Camera key ( ).
The camera viewfinder screen appears in the display.
2. Press the Mode soft key. The camcorder viewfinder screen
appears in the display.