Samsung TXT2793HX-XAA - Manual (Page 13)

English - 12
To Select the Source
Use to select TV or other external input sources such as DVD players, VCRs, etc.
connected to the TV.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Input, then press the ENTER button.
2 Press the ENTER button to select Source List.
Press the ▲ or ▼ button to select signal source, then press the ENTER button.
➢ You can choose between the following sets of jacks: TV, AV1, Component1,
Component2, HDMI or HDMI1, 2 (depending on the model) on the TV’s rear panel and
AV2 or S-Video on the TV’s side panel.
Press the SOURCE button on the remote control to view an external signal source.
➢ HDMI will appear in the Source list for models TX-T2791H and TX-T3091WH.
HDMI1/HDMI2 will appear in the Source list for models TX-T2793H, TX-T3092WH,
and TX-T3093WH.
To Edit the Input Source Name
Name the external device connected to the input jacks to make your input source
selection easier.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Input, then press the ENTER button.
Press the ▲ or ▼ button to select Edit Name, then press the ENTER button.
2 Press the ▲ or ▼ button to select AV1, AV2, S-Video, Component1, Component2,
HDMI (TX-T2791H and TX-T3091WH), or HDMI1, 2 (TX-T2793H, TX-T3092WH, and
TX-T3093WH) input jack, then press the ENTER button.
3 Press the ▲ or ▼ button to select VCR, DVD, D-VHS, Cable STB, HD STB, Satellite STB,
PVR STB, AV Receiver, DVD Receiver, Game, Camcorder, DVD Combo, DVD HDD
Recorder, Internet TV Recv., Interactive TV Recv., VOD STB, or TV input source, then press the ENTER button.
Press the EXIT button to exit.
Using Automatic Picture Settings
Your TV has three automatic picture settings (“Dynamic”, “Standard”, “Movie”) that are
preset at the factory.
You can activate a Picture Setting by making a selection from the menu.
1 Press the MENU button to display the menu.
Press the ENTER button to select Picture.
2 Press the ENTER button to select Mode.
Press the ▲ or ▼ button to select the Dynamic, Standard, or Movie picture setting, then
press the ENTER button.
 Choose Dynamic for viewing the TV during the day or when there is bright light in the
room.
 Choose Standard for general TV watching mode.
 Choose Movie when watching movies.
Press the P.MODE button on the remote control to select one of the standard picture
settings.
3 Press the ▲ or ▼ button to select Contrast, Brightness, Sharpness, Color, or Tint,
then press the ENTER button.
4 Press the ◄ or ► button to decrease or increase the value of a particular item.
➢ You cannot adjust the Tint in DTV, Component or HDMI mode.
5 Press the ENTER button to return to Mode.
6 Press the ▲ or ▼ button to select Color Tone, then press the ENTER button.
7 Press the ▲ or ▼ button to select Cool2, Cool1, Normal, Warm1, or Warm2, then press
the ENTER button.
➢ When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be
selected.
Resetting the Picture Settings to the Factory Defaults
8 Press the ▲ or ▼ button to select Reset, then press the ENTER button.
➢ Each picture mode can be reset.
Press the EXIT button to exit.
▼
TV
AV1 : - - - -
AV2 : - - - -
S-Video : - - - -
Component1 : - - - -
Component2 : - - - -
HDMI1 : - - - -
More
Source List
Move Enter Return
Edit Name
AV1 : - - - -
AV2 : - - - -
S-Video : - - - -
Component1 : - - - -
Component2 : - - - -
HDMI1 : - - - -
HDMI2 : - - - -
----
VCR
DVD
D-VHS
Cable STB
HD STB
Satellite STB
▼
Move Enter Return
Picture
Mode : Dynamic
Contrast 100
Brightness 45
Sharpness 75
Color 55
Tint G 50 R50
Color Tone : Cool1
More ▼
Dynamic
Standard
Movie
Move Enter Return
Picture
Mode : Dynamic
Contrast 100
Brightness 45
Sharpness 75
Color 55
Tint G 50 R50
Color Tone : Cool1
More ▼
Move Enter Return
Cool2
Cool1
Normal
Warm1
Warm2
Contrast 100
Adjust Return Move
AA68-03782G_Eng.indd 12 2007-02-21 ｿﾀﾈﾄ 5:16:09