Samsung TXT2793HX-XAA - Manual (Page 11)

English - 10
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and
subsequently:
1 Press the POWER button on the remote control.
The message Menu language, Shop Mode, Channels and Time will be set is displayed.
Press the ENTER button, then the message Select the language of the OSD. is displayed.
2 Press the ENTER button to enter the language.
Press the ▲ or ▼ button to select language, then press the ENTER button.
The message Select Home Mode when installing this TV at home. is displayed.
3 Press the ◄ or ► button to select Shop or Home, then press the ENTER button.
The message Selects the antenna to execute the Auto Program function. is displayed.
➢  The default selection is Home.
 We recommend setting the TV to Home mode for the best picture in your home
environment.
 Shop mode is only intended for use in retail environments.
 If the unit is accidentally set to Shop mode and you want to return to Dynamic
(Home) mode, press the Volume button and then hold down the MENU button for
five seconds on the TV panel.
4 Press the ▲ or ▼ button to memorize the channels of the selected connection.
Press the ENTER button to select Start.
➢ In Cable mode, you can select the correct signal source among STD, HRC, and IRC
by pressing the ◄ button, then press the ▲ or ▼ button.
Press the ► button to select Start, then press the ENTER button.
Contact your local cable company to identify the type of cable system that exists in
your particular area.
5 The TV will begin memorizing all of the available channels.
After all the available channels are stored, the Auto program menu reappears.
Press the ENTER button when channel memorization is complete. The Clock Mode menu
is displayed.
➢ To stop the search before it has finished, press the ENTER button with Stop selected.
6 Press the ENTER button.
Press the ▲ or ▼ button to select Manual for setting the current time manually, then press
the ENTER button. The message Enter the current date and time. is displayed.
➢ If you select Auto, Set to daylight saving time. is displayed, then go to step 9.
(If you want to set the time automatically, skip to step 9 below.)
7 Press the ◄ or ► button to move to Month, Day, Year, Hour, Minute, or am/pm.
Set the date and time you want by pressing the ▲ or ▼ button, then press the ENTER
button.
➢ You can set the Month, Day, Year, Hour, and Minute directly by pressing the number
buttons on the remote control.
8 The message Enjoy your watching. is displayed.
When you have finished, press the ENTER button.
➢ Even if the ENTER button is not pressed, the message will automatically disappear
after several seconds.
Continued...
Plug & Play
Auto Program in Progress.
15%
Air 16
Enter Skip
Stop
Menu language, Shop Mode,
Channels and Time will be
set
Start
Plug & Play
Enter the current date and time.
Month Day Year
-- ----
Hour Minute am/pm
-- -- --
--
Adjust Enter Skip Move
Plug & Play
Sets the current time manually or automatically.
Clock Mode Auto
Manual
Move Enter Skip
Enjoy your watching.
OK
Plug & Play
Selects the antenna to execute the
Auto Program function.
Air
Cable
Air + Cable
Start
Start
Start
Move Enter Skip
Select the language of the OSD.
Language English
Español
Français
Move Enter Skip
Plug & Play
Select Home Mode when installing this TV at
home.
Shop Home
Move Enter Skip
Plug & Play
AA68-03782G_Eng.indd 10 2007-02-21 ｿﾀﾈﾄ 5:15:57