Samsung SCX-8240NA-CAS User Manual
Page 236
Troubleshooting_ 236
End of life, Replace
with new transfer
belt unit.
The life of the transfer
belt unit expires
totally.
Replace the transfer belt
unit with a
Samsung-genuine
transfer belt unit.
Engine System
Failure [error
number]:Please
open/close door.
There is a problem in
the engine system.
Open and close the front
door. If the problem
persists, call for service.
Engine System
Failure [error
number]:Turn off
then on.
There is a problem in
the engine system.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Fax modem card is
not installed.
Install the card.
The optional fax kit is
not installed.
Install the optional fax kit.
If it is already installed,
try to reinstall the optional
fax kit. If the problem
persists, call for service.
Fax System Failure
[error
number]:Turn off
then on.
There is a problem in
the fax system.
Turn the machine off and
back on again. If the
problem persists, call for
service.
FDI device is not
installed. Install
the device.
The FDI optional FDI
kit is not installed.
Install the optional FDI
kit. If it is already
installed, try to reinstall
the optional FDI kit. If the
problem persists, call for
service.
Feed door is
opened. Close it.
The door is not
securely latched.
Close the door until it
locks into place.
Finisher door is
open. Close it.
The finisher door is
not securely latched.
Close the door until it
locks into place.
Finisher Error
[error
number]:Please
open/close door.
There is a problem in
the finisher.
Open and close the
finisher door. If the
problem persists, call for
service.
Finisher Error
[error
number]:Turn off
then on.
There is a problem in
the finisher.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Finisher System
Failure [error
number]:Please
open/close door.
There is a problem in
the finisher.
Open and close the
finisher door. If the
problem persists, call for
service.
Finisher System
Failure [error
number]:Turn off
then on.
There is a problem in
the finisher.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Front door is open.
Close it.
The door is not
securely latched.
Close the door until it
locks into place.
Fuser Unit Failure
[error
number]:Turn off
then on.
There is a problem in
the fuser unit.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Message
Meaning
Suggested solutions
Fusing unit is not
compatible. Check
user's guide.
The fuser unit you
have installed is not
for your machine.
Install a
Samsung-genuine fuser
unit, designed for your
machine.
Fuser unit is not
installed correctly.
Install it.
The fuser unit is not
properly installed.
Reinstall the fuser unit. If
the problem persists, call
for service.
HCF Failure [error
number]:
Please open/close
HCF.
There is a problem in
the high capacity
feeder.
Open and close the high
capacity feeder. If the
problem persists, call for
service.
HCF is pulled out.
Insert it properly.
The high capacity
feeder is not securely
latched.
Close the high capacity
feeder until it locks into
place.
HDD is almost
full-1. Check user’s
guide.
HDD is almost full in
the machine.
Check Address Book or
User Profile. If
necessary, remove the
data which is unused in
Address Book or User
Profile.
HDD is almost
full-2. Check user’s
guide.
HDD is almost full in
the machine.
Check Document Box,
or Secured Job in Job
Status. If necessary,
remove the data which is
unused in Document
Box or Secured Job.
HDD is almost
full-3. Check user’s
guide.
HDD is almost full in
the machine.
Check System Log at
Security in SyncThru™
Web Service. If
necessary, remove the
data in System Log.
HDD is almost
full-4. Check user’s
guide.
HDD is almost full in
the machine.
•
Print or remove the
jobs on the queue
which are waiting for
its turn. You can check
the jobs pressing Job
Status (see "Job
•
Print or remove the
received fax jobs in
Secure Receive (see
page 117).
HDD is almost
full-5. Check user’s
guide.
HDD is almost full in
the machine.
There is a problem in the
machine. Check the error
message on the display
screen and resolve the
problem.
HDD is almost
full-6. Check user’s
guide.
HDD is almost full in
the machine.
There is a problem in the
machine. Check the error
message on the display
screen and resolve the
problem.
Message
Meaning
Suggested solutions