Samsung SCX-8240NA-CAS User Manual
Page 235
Troubleshooting_ 235
[color] Imaging
Unit Failure [error
number]:Turn off
then on.
There is a problem in
the imaging unit.
Turn the machine off and
back on again. If the
problem persists, call for
service.
[color] imaging
unit is not
compatible. Check
user's guide.
The imaging unit you
have installed is not
for your machine.
Install a
Samsung-genuine
imaging unit designed for
your machine (see
[color] imaging
unit is not
installed. Install it.
The imaging unit is
not installed or the
imaging unit is not
properly installed.
Install the imaging unit. If
it is already installed, try
to reinstall the imaging
unit. If the problem
persists, call for service.
[color] imaging
unit is not original
Samsung. Check
user's guide.
The imaging unit you
have installed is not
for your machine.
Install a
Samsung-genuine
imaging unit, designed
for your machine (see
[color] imaging
unit requires
charger's cleaning.
Clean the unit.
The charger of
imaging unit need to
clean after the
specified number of
paper is printed out.
Clean the charger of
imaging unit (see
[color] LSU Unit
Failure [error
number]:Turn off
then on.
There is a problem in
the LSU (Laser
Scanning Unit).
Turn the machine off and
back on again. If the
problem persists, call for
service.
[color/black] toner
cartridge Failure
[error
number]:Install
[color] toner
cartridge again.
There is a problem in
the toner cartridge.
Reinstall the toner
cartridge. If the problem
persists, call for service.
[color/black] toner
cartridge Failure
[error number]:
Install [color] toner
cartridge again.
The toner cartridge
you have installed is
not for your machine.
Install a
Samsung-genuine toner
cartridge designed for
your machine (see
Message
Meaning
Suggested solutions
[color/black] toner
cartridge Failure
[error number]:
Please open/close
door.
The toner cartridge
does not supply
enough toner.
•
Thoroughly roll the
cartridge five or six
times to distribute the
toner evenly inside the
cartridge (see
•
Open and close the
front door. Or check
whether the seal tape
of the toner cartridge is
removed or not (see
page 189).
•
If the problem persists,
call for service.
[color/black] toner
cartridge is not
compatible. Check
user's guide.
The toner cartridge
you have installed is
not for your machine.
Install a
Samsung-genuine toner
cartridge designed for
your machine (see
[color/black] toner
cartridge is not
installed. Install it.
The toner cartridge is
not installed or the
cartridge is not
properly installed.
Install the toner cartridge.
If it is already installed,
try to reinstall the toner
cartridge. If the problem
persists, call for service.
DCF Failure [error
number]:
Check internal DCF
connection.
There is a problem in
the dual capacity
feeder.
Open and close the dual
capacity feeder, or check
the dual capacity feeder
connection with the
machine. If the problem
persists, call for service.
DCF Failure [error
number]:
Please open/close
[tray number].
There is a problem in
the dual capacity
feeder.
Open and close the tray.
If the problem persists,
call for service.
End of life, Replace
with new [color]
imaging unit.
The life of the imaging
unit expires totally.
Replace the imaging unit
with a Samsung-genuine
imaging unit (see
End of life, Replace
with new [color]
toner cartridge.
The toner cartridge
has run out. The
machine stops
printing. Some
amount of toner may
remain in the cartridge
even when the
machine stops
printing.
.
This message appears
when the toner is
completely empty, and
your machine stops
printing. Replace the
toner cartridge with a
Samsung-genuine toner
cartridge (see "Replacing
Message
Meaning
Suggested solutions