Stop watch, Converter, Stop watch converter – Samsung SCH-R210LSACRI User Manual
Page 59
Tools/Utilities 59
• Press
to enter a decimal point. (Calculator only accepts 2
digits after a decimal point.)
• Press
to change the sign for a number to a negative.
3.
Use the Navigation key to set the type of calculation that
you wish to perform. Your choices are as follows:
• Up navigation key — [x] Multiplication
• Left navigation key — [-] Subtraction
• OK key — [=] Equals/Total
• Right navigation key — [+] Addition
• Down navigation key — [÷] Division
4.
Use the keypad to enter the second number into your
equation.
For additonal equation entry options, press Operator
(
). The following options appear in the display:
• ( — Beginning of nested equation
• ) — End of nested equation
• Power — Raise the entered number to a power
5.
Press
to perform the calculation and view the result.
To perform another calculation, press Clear (
).
Stop Watch
You can use this menu to set a stop watch.
1.
From the Tools/Utilities menu, select Stop Watch.
2.
To start, stop, and resume the stopwatch count, press
.
3.
At the start of each succeeding event/lap, press Record
(
) to record the completion time for the previous
event/lap.
4.
To erase all stop watch (lap) times recorded, press Reset
(
).
Converter
The conversion menu provides the following conversion
categories:
•
Currency
•
Length
•
Weight
•
Volume
•
Area
•
Temperature
To convert a currency, length, weight, volume, area, or
temperature, do the following:
1.
From the Tools/Utilities menu, select Converter and the
conversion feature you wish to use.