Samsung YP-G1CW-XAA - Manual (Page 119)

Settings 115
USB Debugging
When enabled, allows debugging when the device is attached to
a PC by a USB cable.
Note: This setting is used for development purposes.
1. From a Home screen, touch the Menu Key ➔ Settings
➔ Applications ➔ Development.
2. Touch USB debugging to enable or disable the setting.
When enabled, a check mark appears in the check
box.
Allow Mock Locations
This setting is used by developers when developing location-
based applications.
Note: This setting is used for development purposes.
1. From a Home screen, touch the Menu Key ➔ Settings
➔ Applications ➔ Development.
2. Touch Allow mock locations to enable or disable the
setting. When enabled, a check mark appears in the
box.
Samsung Apps
Using the Samsung Apps option, the device notifies you when
there are new applications in Samsung Apps.
1. From a Home screen, touch the Menu Key ➔ Settings
➔ Applications ➔ Samsung Apps.
2. For new application notification, touch On. Touch Off to
disable new application notification.
3. To delete Samsung Apps’ locale data, touch Reset locale
and then touch OK.
Accounts and Sync
Set up and manage accounts, including your Google and Backup
Assistant accounts.
General Sync Settings
Background Data
When enabled, all accounts can sync, send, and receive data at
any time, in the background.
Important!: Disabling background data can extend battery life and lower data
use. Some applications may still use the background data
connection, even if this setting is disabled.