ADC CRA-C - Manual (Page 72)

Network and Management Overview
64 Megabit Modem CRA-C User Manual
The Spanning Tree MIB can only be accessed if the
Spanning Tree protocol is enabled.
_
PairGain REX MIB an enterprise specific MIB designed for the
agent in the Megabit Modem CRA-C for managing the ADSL portion
of the unit.
_
The Ethernet interface has the ifIndex value of 1 and the WAN
(ADSL) interface has an ifIndex of 2.
Access any PairGain-specific MIBs through the Internet at ftp.pairgain.com.
Use the following:
• FTP ftp.pargain.com
_
login using anonymous as you log-in name
_
use guest or your e-mail address as you user password
_
enter cd snmp/rex/mibs
• get pgrexmib.txt
Network Configuration and Image Code Download
BOOTP
BOOTP is used to supply network configuration information to Megabit
Modem CRA-C from a BOOTP server. Used in conjunction with TFTP, you
can use BOOTP to download image code. The Megabit Modem CRA-C
initiates a BOOTP request in these situations:
_
current configuration sector is determined to be invalid; this can occur
when the CRC of configuration sector does not match the expected
CRC on power-up
_
user sets the value of Boot Mode to NETWORK, saves the
configuration to flash, and then reboots the Megabit Modem CRA-C