ADC CRA-C - Manual (Page 31)

Configure and View Status
Megabit Modem CRA-C User Manual 23
How to Configure a Remote Unit
From the Megabit Modem CRA-C, you can view system parameters and set
configuration options for the remote Megabit Modem CRA. The remote
console menu header reflects the remote unit as ATU-R. This shows that the
console program is physically connected to the unit at the service provider site
(ATU-C), but is virtually configuring the unit at the subscriber site (ATU-R).
At the Main Menu, type 4 4
for Remote Logon to display the configuration and
status menus for Megabit Modem CRA (remote ATU-R).
07/02/97 PAIRGAIN TECHNOLOGIES 08:43:18
ATU-C ADSL MEGABIT MODEM TERMINAL 01.01
MAIN MENU
1. SYSTEM STATUS AND CONFIGURATION
2. ADSL MENU
3. BRIDGE/ROUTER MENU
4. REMOTE LOGON
Q. LOGOUT
ENTER CHOICE-->
The following Remote Logon screen is displayed.
07/02/97 PAIRGAIN TECHNOLOGIES 08:42:28
ATU-R ADSL MEGABIT MODEM TERMINAL 01.01
LOGON PASSWORD>
Optionally, you can press Ctrl
T
at the logon screen or at any menu
shown in the menu tree (Figure 8) to toggle between the local and remote
Megabit Modems.