ADC CRA-C - Manual (Page 70)

Network and Management Overview
62 Megabit Modem CRA-C User Manual
Table 19. SNMP Configuration Default Values
Attribute Factory Default
Download Image File Name Not configurable via console
Local IP Address 0.0.0.0
Local Subnet Mask 255.255.255.0
Boot Router IP Address 0.0.0.0
Default Router IP Address 0.0.0.0
Boot Server IP Address 0.0.0.0
Boot Mode (local, network) local
Image Load Mode (local, network) local
SNMP RO Community String public
SNMP RW Community String private
Trap Receiver 1 IP Address 0.0.0.0
Trap Receiver 1 Community String null string
Trap Receiver 2 IP Address 0.0.0.0
Trap Receiver 2 Community String Null string
Authentication Trap enable/disable disable
ST Enable/disable disable
Megabit Modem CRA-C SNMP Agent
An agent is program resident in managed devices (for example, Megabit
Modem CRA-C, modems, nodes, routers and hubs). Agents translate data into
code the NMS can read. Agents and NMS communicate using SNMP as the
transport mechanism. SNMP uses standard Internet Protocol (IP) to transport
incoming and outgoing messages to the appropriate agent or NMS address.
Each SNMP command requires an IP address or NMS from the agent to
transport these messages.