ADC CRA-C - Manual (Page 43)

Configure and View Status
Megabit Modem CRA-C User Manual 35
The following screen shows configuration for a Megabit Modem
CRA (ATU-R) routed toward a Megabit Modem CRA-C
(ATU-C), using IP addresses from the example in Figure 12.
07/02/97 PAIRGAIN TECHNOLOGIES 08:54:33
ATU-R ADSL MEGABIT MODEM TERMINAL 01.01
BRIDGE/ROUTING CONFIGURATION MENU
---------------------------------------------------------------
MODE SETTING 1. BRIDGE/ROUTER MODE ROUTER
IP STATIC ROUTING DESTINATION SUBNET MASK GATEWAY ADDRESS
TABLE 2. DEFAULT 172.16.100.1
3. 0.0.0.0 0.0.0.0 0.0.0.0
4. 0.0.0.0 0.0.0.0 0.0.0.0
5. 0.0.0.0 0.0.0.0 0.0.0.0
LAN PORT CONF. 6. LAN IP ADDR: 192.168.242.1
7. LAN SUBNET MASK: 255.255.255.0
LINE PORT CONF. 8. LINE IP ADDR: 172.16.100.2
9. LINE SUBNET MASK: 255.255.255.0
OTHER CONF. A. BOOT SERVER IP ADDR: 0.0.0.0
B. BOOT MODE: LOCAL
C. IMAGE FILE NAME:
D. IMAGE LOAD MODE: LOCAL
E. PACKET ENCAPSULATION: HDLC
---------------------------------------------------------------
C(o)nfirm (U)ndo (R)eturn (M)ain
ENTER CHOICE-->
3 Do the following for each Router Configuration option you want
to change:
_
Type the number or letter of the option you want
to configure.
_
Select, using the spacebar, or type in the appropriate
information for each option as indicated in Table 11 then
press
ENTER ENTER .