Atlantis Land ISDN Router with 10/100 LAN port ATLMMR MNE01 - Manual (Page 9)

6
Chapter 3
Configuration
3.1 Before Configuration
This section describes the configuration required by LAN-attached PCs that communicate with ISDN
Router, either to configure ISDN Router, or for network access. These PCs must have an Ethernet interface
installed properly, be connected to ISDN Router either directly or through an external repeater hub, and have
TCP/IP installed and configured to obtain an IP address through a DHCP server.
Directly connect a Windows OS to ISDN Router. If TCP/IP is not already installed, follow the steps below
for its installation.
Any TCP/IP capable workstation can be used to communicate with or through ISDN
Router. To configure other types of workstations, please consult the manufacturer’s
documentation
Configuring PC in Windows 95/98/ME
1. Go to Start/Settings/Control
Panel. In the Control Panel
double-click on Network and
choose the Configuration tab.
2. Select TCP/IP ->
NE2000 Compatible, or any
Network Interface Card (NIC)
in your PC.