Atlantis Land ISDN Router with 10/100 LAN port ATLMMR MNE01 - Manual (Page 26)

23
Make sure the remote site is configured with the same values you specify in My
System Name and My System Password.
Remote System Name:
Remote System Password:
Step 6: If you selected Outgoing or Both as your Call Direction, click APPLY and TEST, or select
ADVANCED for more options. You must still click Apply and Test even if the other end of the
connection has not been configured. In this case the test will fail, but that can be considered normal.
4.2 Advanced Options for Remote Office Access Profiles
If you press the Advanced button from the above Connection Profile Configuration, the following
screen appears.
Step 1: Set any of the following parameters:
Data Service: choose 64K, 56K, or Auto. Select Auto unless you know the speed required by the other
end of the connection requiring either 64K or 56K.
Remote Sub-Address:
Caller ID Authentication: select Yes if you want to check the caller ID before accepting the call. This
service may require a special agreement with your ISDN service provider.
Caller ID Number: