Atlantis Land ISDN Router with 10/100 LAN port ATLMMR MNE01 - Manual (Page 31)

28
Step 8: Click OK to back to the previous screen and click OK again to back to Connection Profile
Configuration screen.
5.2 Deleting Dial-in User Profiles
Follow the steps to delete a Dial-in User Connection Profile.
Step 1: Select Connection Profiles from the Menu Window.
Step 2: Highlight the entry in the list you want to delete, and click Delete.
5.3 Packet Filtering
To add a new packet rule or to edit an existing one, select IP Filter from the Configuration Menu. Then
IP Filtering Configuration window will appear.
Step 1: From the IP Filtering Configuration screen, select the WAN profile of interest from the pull
down menu. For example, if your only need is to access the Internet, you should only select the Internet
access profile.
Step 2: Select send or discarded as desired, which is equivalent to allow and disallow, respectively.
Step 3: If you are just starting, click Add to add a new selection rule. If you have previously defined
rules, you will see those rules shown as entries in the rule table, and you can edit the rule by first
highlighting the desired entry in the rule table followed by clicking the Edit button.
Step 4: In case of adding a new selection rule, the following screen shows.