Atlantis Land ISDN Router with 10/100 LAN port ATLMMR MNE01 - Manual (Page 19)

16
An entry for a specific host or network may be added manually. An “S” in the Flags field indicates this
“static route”. Other flag field entries are “H” for host, and “G” for gateway.
Follow the steps to add or to change the default route or add a static route:
Step 1: Click the Add button in the IP Routing Table screen to display the following screen:
Step 2: Enter the following information:
Default Route: select if you want to specify a new default route. Note that the Remote IP Address and
Remote IP netmask fields do not appear if you select this option. CAUTION: Mis-configuring the default
route may result in abnormal system behavior and/or unnecessary telephone charges.
Static Route: select if you want to add a static route.
Remote IP Address: the remote IP address of the new route.
Remote IP Netmask: the IP netmask of the new route.