Wireless, Trouble-shooting – Maximum Wireless Merlin User Manual
Page 13
WIRELESS
TROUBLE-SHOOTING
Page 13
NO SIGNAL FROM ANY TRANSMITTER
(Instrument recognizes the receiver, but the receiver does not recognize the sensor(s))
SYMPTOM:
REMEDY:
-Merlin reads 0 mph and the North direction LED is illuminated.
-Mystic reads 32 F and the Temperature and Present LED’s are
illuminated.
-Test the batteries in each external SENSOR/TRANSMITTER
and replace if necessary.
-Put the TRANSMITTER(S) into TEST MODE by pressing TEST
BUTTON in the battery compartment of TRANSMITTER.
-Remove the RECEIVER from the wall and confirm receipt of
TRANSMISSION(S) based on the color of the flashing light.
MERLIN
RECEIVER
INDICATOR
ORANGE
RED
GREEN
TRANSMITTER
RED
GREEN
ORANGE
....................WIND
................RAIN
.........TEMPERATURE
-If the instrument continues to display the error code, call Maximum
for further assistance.
Note: Depending on the origin of the problem, error
codes may not display on all instruments.
30 Barnet Boulevard
New Bedford, MA 02745
(508) 995-2200
N
E
S
W
N
W
N
E
SE
S
W
MERLIN
PRESENT
PEAK
AVERAGE
FORECAST
MYSTIC
PRESENT
HIGH
LOW
RATE OF CHANGE
WIND CHILL
TEMPERATURE
PRESSURE
MYSTIC