Maximum Vigilant - Manual (Page 3)

IMPORTANT ADDITIONAL INFORMATION
Components: Along with the indicator, the following components are included with this instrument:
Rooftop sensor: To insure a clear unobstructed path for the wind to the sensor, it should be
mounted on some type of antenna mast at least 8-10’ above the highest object on your roof.
Remember, your roof is also an obstruction and it usually requires at least 8’ of height to avoid the
turbulence it creates.
Sensor: Properly installed, your sensor will require virtually no maintenance at all. Our sensors
do not utilize brushes or wiping contacts. All bearings are Rulon-J self lubricating type and will
perform for many years in the harshest environments.
Brass Case: Your brass case is solid brass A70-30 Holloware quality, with a durable lacquer
finish. It is in fact a piece of jewelry and should be treated as such. It should be cleaned at least
once a week to keep airborne pollutants (dust, etc…) and any moisture from collecting on the case
thereby attacking the lacquer. At no time should you use an abrasive cleaner or cloth on the brass
case. Simply use a soft cloth or soft paper towel with a mild glass cleaner to wipe the case clean.
If your instruments are in a summer home, and you are not able to clean them regularly, simply lay
a small cloth or towel across the top two-thirds so that dust cannot settle on the finish.
Specifications: All instrumentation or measuring devices have accuracy tolerances and
specifications. Making comparisons between different pieces of equipment is appropriate provided
the specified accuracies of both are known.
Measurement Range Guaranteed Accuracy
Wind Speed 0-100 MPH ±3% Full Scale & Mid Scale
- with Scale Doubler 0-200 MPH ±3% Full Scale & Mid Scale