Maximum Mystic - Manual (Page 3)

MYSTIC
OPERATION
30 Samuel Barnet Boulevard
New Bedford, MA 02745
(508) 995-2200
NOTE: After any "FULL" reset, temperature and/or wind chill data will be displayed and
stored after ten seconds. Pressure data will be displayed and stored after two minutes.
However, Rate of Change/Pressure will show "HOLD" for 72 minutes following a
"FULL" reset.
Any Individual function's memory can be independently reset.
Move the toggle switch to the right (auto) until that particular function is
displayed. Then move the toggle switch to the left (reset) and hold it for
six seconds. The display will quickly blank, indicating that the memory
for that function has been reset.
A "FULL" reset may also be done to clear all memories simultaneously
or if an adjustment to the barometer setting is needed. Toggle through Mystics settings until the "Present"
fuction is displayed. Then move the toggle switch to the left (reset) and hold it for six seconds. The display
will self-test and enter into the barometer adjustment mode. If necessary the barometer may be reset at this
time by adjusting the set screw on the backplate. Exit the barometer adjustment mode by moving the toggle
switch to the right (auto) and releasing it.
When the toggle switch is in the center position Mystic will display the
information that is indicated by the function light. All the other functions
data are being recorded and stored.
Moving the toggle switch to the right (auto) and holding it for at least three
seconds will put Mystic into its Auto sequencing mode. You will see each
function light stay on and that particular information displayed for approximately
four seconds and then move to the next function automatically.
If Mystic is Auto sequencing and you wish to turn that function off - move the
toggle switch to the right (auto) and release it. You can now manually step
through the functions as previously mentioned.
Move the toggle switch at the bottom of the case to the right (auto) and allow it
to return. This manually moves the Mystic through the individual functions. The
illuminated function LED's indicate which function and setting is being displayed.